This directory combines historical reference rows with separately labelled national sources. Read the source title, observation date, printed units and conditions on each entry. National source observations do not establish all measures applicable to a shipment.

Egypt Customs Tariff for HS Code 720825

Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 4.75mm or more

See Egyptian Customs national subdivisions and their reported duties

Direct HS code answer for Egypt

Egypt HS Code 720825: 5%

The source reports an indicative HS6 MFN average of 5% for Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 4.75mm or more.Source status: not assessed. Verify the exact national tariff line, origin treatment, taxes, restrictions, and current customs guidance before using this information in a declaration.

Browse chapter 72 Search parent HS 720825 Request import report

Customs tariff summary

Country: Egypt
HS / tariff code: 720825
Description: Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 4.75mm or more
Chapter: 72 —
Heading: 7208
Subheading: 720825
Indicative MFN HS6 average: 5%
VAT / tax: Check local VAT and excise rules for the import destination.
Unit / basis: Not listed in this tariff line
Source / vintage: WITS/UNCTAD TRAINS (MFN 2019) (2019)

Historical MFN average

Import permission

not assessed

Egyptian Customs national subdivisions

Official lookup checked 2026-09-15. These ten-digit codes share the prefix 720825; choose the product using its national description. The historical WITS average above is not the duty of each subdivision.

The lookup supplies no line-level effective date. Origin preferences, exemptions and conditions can change the payable amount. The original Arabic descriptions, taxes and conditions are retained below; an import-duty percentage is not a total-tax calculation or an import permission.

Open this prefix in the Egyptian Customs lookup

7208250000

منتجات مسطحة مرققة بالاسطوانات [مدرفلة ] من حديد ,او من صلب من غير الخلائط بعرض 600 مم او اكثر , مدرفلة بالحرارة , غير مكسوة ولا مطلية ولا مغطاة , بشكل لفات , غير مشغولة باكثر من الدرفلة بالحرارة, منظفة كيميائيا, بسمك 4.75 مم او اكثر

Reported import duty: 5% (reported; conditions apply)

Original taxes and conditions (Arabic)

Tax entries — separate charges, not summed

ضريبة الوارد : 5%
ضريبة قيمه مضافه : 14% (من القيمة + ر.ض.جمركية)

Conditions and source references

ر6584-يحصل رسم تنمية موارد الدولةبواقع 10% على جميع أنواع الحديد تام الصنع
ر6607- تخفض الرسوم الجمركية فى ظل اتفاقيةتركيا بنسبة100% على اصناف واردةبالقائمة 1 برتوكول 1
ر6631-يعفى من الضريبة الجمركية والرسوم ذات الاثر المماثل الأصناف الواردة من دول الافتا بنسبة100%
ر6663-تخفض ض .ج ورسوم ذات أثر مماثل بنسبة 100%علىسلع صناعيةواردةفى ظل شراكةأوربيةملحق2 ،3 ، 4
ر6668-تخفض ض .ج ورسوم بنسبة100%علىسلع صناعيةواردةفى ظل اتفاقية الشراكةالمصرية والمملكة المتحدة
ر6702-فى ظل اتفاق التجارة الحرة بين ج م ع وتجمع الميركسور تخفض الضريبة الجمركية 100%- قائمة ج
ر6790-اتفاقية التجارة الحرة الافريقية القارية مجموعة [أ]تخفض 100%
ر6791-اتفاقية التجارة الحرة الافريقية القارية مجموعة [ب] تخفض 60%
ر6904-تخضع واردات من صنف مسطحات الصلب المدرفلة لرسم تدابير وقائية مؤقتة بنسبة [13.5%] من قيمةسيف
غ6555-يراعى إيداع حصيلة رسم الإغراق والتدابير الوقائية لحساب وزارة الاستثمار والتجارة الخارجية
غ6904-تخطـــر مصلحـــه الضرائب المصرية فى حالة رد ض القيمة المضافةالسابق سدادها على رسوم الاغراق
ق4518-لايصرح باستيراد صنف الا بموافقة مختومة بخاتم شعارجمهوريةمن هـ .ع.ص.وطبقا لملحق8 وتعديلاته

Import planning

Need a landed cost report for this HS code?

Request a one-page research summary with source checks, landed-cost inputs, and points to verify for HS code 720825 in Egypt.

Get report

Details

HS Code: 720825
Chapter: 72 —
Heading: 7208
Subheading: 720825

Compare HS code 720825 across GCC countries

Each destination shows its own source label. Oman uses its national schedule; Qatar and UAE entries may cite their separately published references and unresolved exceptions. Other entries retain the historical GCC reference. National codes, duty notes, restrictions and tax treatment can differ; verify with the destination customs authority.

Saudi ArabiaSearch parent HS 720825 United Arab EmiratesSearch parent HS 720825 OmanSearch parent HS 720825 QatarSearch parent HS 720825 KuwaitSearch parent HS 720825 BahrainSearch parent HS 720825

Related HS Codes (Heading 7208)

HS Code	Description	Duty
720810	Iron or non-alloy steel; in coils, flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief	5%
720826	Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 3mm or more but less than 4.75mm	5%
720827	Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of less than 3mm	5%
720836	Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness exceeding 10mm	5%
720837	Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 4.75mm or more but not exceeding 10mm	5%
720838	Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 3mm or more but less than 4.75mm	5%
720839	Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of less than 3mm	5%
720840	Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief	5%
720851	Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness exceeding 10mm	5%
720852	Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 4.75mm or more but not exceeding 10mm	5%
720853	Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 3mm or more but less than 4.75mm	5%
720854	Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of less than 3mm	5%
720890	Iron or non-alloy steel; flat-rolled, hot-rolled, of a width 600mm or more, n.e.c. in heading no. 7208	5%

Data source: WITS/UNCTAD TRAINS (MFN 2019). Values are indicative HS6 MFN averages, not shipment-specific applied rates. Import permission and restrictions are not assessed. Historical reference rates exclude VAT, excise and other national measures. Separate national entries preserve the columns printed by their source; these are not a complete shipment assessment. Full disclaimer.