CustomsTariffs.com
This directory combines historical reference rows with separately labelled national sources. Read the source title, observation date, printed units and conditions on each entry. National source observations do not establish all measures applicable to a shipment.

Egypt Customs Tariff for HS Code 721990

Steel, stainless; flat-rolled, width 600mm or more, n.e.c. in heading no. 7219

See Egyptian Customs national subdivisions and their reported duties

Direct HS code answer for Egypt

Egypt HS Code 721990: 2%

The source reports an indicative HS6 MFN average of 2% for Steel, stainless; flat-rolled, width 600mm or more, n.e.c. in heading no. 7219.Source status: not assessed. Verify the exact national tariff line, origin treatment, taxes, restrictions, and current customs guidance before using this information in a declaration.

Browse chapter 72Search parent HS 721990Request import report

Customs tariff summary

Country
Egypt
HS / tariff code
721990
Description
Steel, stainless; flat-rolled, width 600mm or more, n.e.c. in heading no. 7219
Chapter
72 —
Heading
7219
Subheading
721990
Indicative MFN HS6 average
2%
VAT / tax
Check local VAT and excise rules for the import destination.
Unit / basis
Not listed in this tariff line
Source / vintage
WITS/UNCTAD TRAINS (MFN 2019) (2019)

Historical MFN average

2%

2%

Import permission

not assessed

Egyptian Customs national subdivisions

Official lookup checked 2026-09-15. These ten-digit codes share the prefix 721990; choose the product using its national description. The historical WITS average above is not the duty of each subdivision.

The lookup supplies no line-level effective date. Origin preferences, exemptions and conditions can change the payable amount. The original Arabic descriptions, taxes and conditions are retained below; an import-duty percentage is not a total-tax calculation or an import permission.

Open this prefix in the Egyptian Customs lookup

7219900000

منتجات أخر مسطحة مرققةبالإسطوانات[مدرفلة]خلاف ماذكر من صلب مقاوم للصدأ ، بعرض 600 مم أو أكثر .

Reported import duty: 2% (reported; conditions apply)

Original taxes and conditions (Arabic)

Tax entries — separate charges, not summed

  • ضريبة الوارد : 2%
  • ضريبة قيمه مضافه : 14% (من القيمة + ر.ض.جمركية)

Conditions and source references

  • ر6607- تخفض الرسوم الجمركية فى ظل اتفاقيةتركيا بنسبة100% على اصناف واردةبالقائمة 1 برتوكول 1
  • ر6631-يعفى من الضريبة الجمركية والرسوم ذات الاثر المماثل الأصناف الواردة من دول الافتا بنسبة100%
  • ر6663-تخفض ض .ج ورسوم ذات أثر مماثل بنسبة 100%علىسلع صناعيةواردةفى ظل شراكةأوربيةملحق2 ،3 ، 4
  • ر6668-تخفض ض .ج ورسوم بنسبة100%علىسلع صناعيةواردةفى ظل اتفاقية الشراكةالمصرية والمملكة المتحدة
  • ر6700-فى ظل اتفاق التجارة الحرة بين ج م ع وتجمع الميركسور تخفض الضريبة الجمركية 100% - قائمة أ
  • ر6790-اتفاقية التجارة الحرة الافريقية القارية مجموعة [أ]تخفض 100%
  • ر6791-اتفاقية التجارة الحرة الافريقية القارية مجموعة [ب] تخفض 60%
  • ق4518-لايصرح باستيراد صنف الا بموافقة مختومة بخاتم شعارجمهوريةمن هـ .ع.ص.وطبقا لملحق8 وتعديلاته

Import planning

Need a landed cost report for this HS code?

Request a one-page research summary with source checks, landed-cost inputs, and points to verify for HS code 721990 in Egypt.

Get report

Details

HS Code
721990
Chapter
72 —
Heading
7219
Subheading
721990

Compare HS code 721990 across GCC countries

Each destination shows its own source label. Oman uses its national schedule; Qatar and UAE entries may cite their separately published references and unresolved exceptions. Other entries retain the historical GCC reference. National codes, duty notes, restrictions and tax treatment can differ; verify with the destination customs authority.

Saudi ArabiaSearch parent HS 721990United Arab EmiratesSearch parent HS 721990OmanSearch parent HS 721990QatarSearch parent HS 721990KuwaitSearch parent HS 721990BahrainSearch parent HS 721990

Related HS Codes (Heading 7219)

HS CodeDescriptionDuty
721911Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness exceeding 10mm2%
721912Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 4.75mm or more but not exceeding 10mm2%
721913Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 3mm or more but less than 4.75mm2%
721914Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of less than 3mm2%
721921Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness exceeding 10mm2%
721922Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 4.75mm or more but not exceeding 10mm2%
721923Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 3mm or more but less than 4.75mm2%
721924Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of less than 3mm2%
721931Steel, stainless; flat-rolled, width 600mm or more, cold-rolled or cold-reduced, of a thickness of 4.75mm or more2%
721932Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more but less than 4.75mm2%
721933Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm2%
721934Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm2%
721935Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm2%

Data source: WITS/UNCTAD TRAINS (MFN 2019). Values are indicative HS6 MFN averages, not shipment-specific applied rates. Import permission and restrictions are not assessed. Historical reference rates exclude VAT, excise and other national measures. Separate national entries preserve the columns printed by their source; these are not a complete shipment assessment. Full disclaimer.