Historical MFN averages (2020); not current shipment rates. HS6 descriptions use the UN Comtrade Combined HS reference; the original rate nomenclature remains unconfirmed. National special codes require destination-specific verification. No effective date is available. The data review on September 11, 2026 does not update the rates. Reference source.

Chapter 44:

96 total items96 with duty rates0 headings
HS CodeDescriptionArabicDuty Rate
4401.11Wood; for fuel, in logs, in billets, in twigs, in faggots or similar forms, whether or not agglomerated, coniferousExempted
4401.12Wood; for fuel, in logs, in billets, in twigs, in faggots or similar forms, whether or not agglomerated, non-coniferousExempted
4401.21Wood; for fuel, in chips or particles, coniferous, whether or not agglomeratedExempted
4401.22Wood; for fuel, in chips or particles, non-coniferous, whether or not agglomeratedExempted
4401.31Wood; for fuel, sawdust and wood waste and scrap, agglomerated in wood pelletsExempted
4401.39Wood; for fuel, sawdust and wood waste and scrap, agglomerated in logs or similar forms, other than wood pellets or wood briquettesExempted
4402.10Wood; charcoal of bamboo, whether or not agglomerated5%
4402.90Wood; charcoal of wood other than bamboo, nut or shell, whether or not agglomerated5%
4403.11Wood; coniferous species, in the rough, whether or not stripped of bark or sapwood, or roughly squared; treated with paint, stains, creosote or other preservativesExempted
4403.12Wood; non-coniferous species, in the rough, whether or not stripped of bark or sapwood, or roughly squared; treated with paint, stains, creosote or other preservativesExempted
4403.21Wood; coniferous species, of pine (Pinus spp.), in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreated, of which the smallest cross-sectional dimension is 15 cm or moreExempted
4403.22Wood; coniferous species, of pine (Pinus spp.), in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreated, of which any cross-sectional dimension is less than 15 cmExempted
4403.23Wood; coniferous species, of fir (Abies spp.) and spruce (Picea spp.), in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreated, of which the smallest cross-sectional dimension is 15 cm or moreExempted
4403.24Wood; coniferous species, of fir (Abies spp.) and spruce (Picea spp.), in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreated, of which any cross-sectional dimension is less than 15 cmExempted
4403.25Wood; coniferous species n.e.c. in headings 4403.21 or 4403.23, in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreated, of which the smallest cross-sectional dimension is 15 cm or moreExempted
4403.26Wood; coniferous species n.e.c in headings 4403.22 or 4403.24, in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreated, of which any cross-sectional dimension is less than 15 cmExempted
4403.41Wood, tropical; as specified in Subheading Note 2 to this Chapter, dark red meranti, light red meranti and meranti bakau, in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreatedExempted
4403.49Wood, tropical; other than dark red meranti, light red meranti meranti bakau and teak, in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreatedExempted
4403.91Wood; oak, in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreatedExempted
4403.93Wood; of beech (Fagus spp.), in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreated, of which the smallest cross-sectional dimension is 15 cm or moreExempted
4403.94Wood; of beech (Fagus spp.), in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreated, of which any cross-sectional dimension is less than 15 cmExempted
4403.95Wood; of birch (Betula spp.), in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreated, of which the smallest cross-sectional dimension is 15 cm or moreExempted
4403.96Wood; of birch (Betula spp.), in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreated, of which any cross-sectional dimension is less than 15 cmExempted
4403.97Wood; of poplar and aspen (Populus spp.), in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreatedExempted
4403.98Wood; of eucalyptus (Eucalyptus spp.), in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreatedExempted
4403.99Wood; in the rough, whether or not stripped of bark or sapwood, or roughly squared, untreated, n.e.c. in heading no. 4403Exempted
4404.10Wood; coniferous, split poles, piles, pickets, stakes, pointed but not sawn lengthwise; sticks for umbrellas, tool handles etc, roughly trimmed but not turned or bent; chipwood etc, hoopwoodExempted
4404.20Wood; non-coniferous, split poles, piles, pickets, stakes, pointed but not sawn lengthwise; sticks for umbrellas, tool handles etc, roughly trimmed but not turned or bent; chipwood etc, hoopwoodExempted
4405.00Wood; wood wool and wood flourExempted
4406.11Wood; railway or tramway sleepers (cross-ties), not impregnated, coniferousExempted
4406.12Wood; railway or tramway sleepers (cross-ties), not impregnated, non-coniferousExempted
4406.91Wood; railway or tramway sleepers (cross-ties), impregnated, coniferousExempted
4406.92Wood; railway or tramway sleepers (cross-ties), impregnated, non-coniferousExempted
4407.11Wood; coniferous species, of pine (Pinus spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, of a thickness exceeding 6mmExempted
4407.12Wood; coniferous species, of fir (Abies spp.) and spruce (Picea spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, of a thickness exceeding 6mmExempted
4407.19Wood; coniferous species, other than of pine (Pinus spp.) or fir (Abies spp.) or spruce (Picea spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, of a thickness exceeding 6mmExempted
4407.21Wood, tropical; as specified in Subheading Note 2 to this Chapter, mahogany (Swietenia spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mmExempted
4407.22Wood, tropical; virola, imbuia and balsa, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mmExempted
4407.25Wood, tropical; dark red meranti, light red meranti and meranti bakau, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mmExempted
4407.26Wood, tropical; white lauan, white meranti, white seraya, yellow meranti and alan, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mmExempted
4407.27Wood, tropical; sapelli, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mmExempted
4407.28Wood, tropical; iroko, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mmExempted
4407.29Wood, tropical, n.e.c. in item no. 4407.2, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, of a thickness exceeding 6mmExempted
4407.91Wood; oak (Quercus spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mmExempted
4407.92Wood; beech (Fagus spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mmExempted
4407.93Wood; maple (Acer spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mmExempted
4407.94Wood; cherry (Prunus spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mmExempted
4407.95Wood; ash (Fraxinus spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, thicker than 6mmExempted
4407.96Wood; of birch (Betula spp.), sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6mm, whether or not planed, sanded or finger-jointedExempted
4407.97Wood; of poplar and aspen (Populus spp.), sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6mm, whether or not planed, sanded or finger-jointedExempted
4407.99Wood; sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6mm, whether or not planed, sanded or finger-jointed, n.e.c. in heading no. 4407Exempted
4408.10Wood; coniferous, sheets for veneering (including those obtained by slicing laminated wood), for plywood or similar laminated wood and other wood, sawn lengthwise, sliced or peeled, planed or not, sanded, spliced or end-jointed, not over 6 mm thickExempted
4408.31Wood, tropical; as specified in Subheading Note 2 to this Chapter, dark red meranti, light red meranti, meranti bakau, sheets for veneer, plywood or other wood, sawn lengthwise, sliced or peeled, planed or not, sanded or end-jointed, not thicker than 6mmExempted
4408.39Wood, of tropical wood; as in Subheading note 2 to this Chapter, n.e.c. in heading no. 4408.31, sheets for veneer or plywood, other wood sawn length wise, sliced or peeled, whether or not planed, sanded or end-jointed, not thicker than 6mmExempted
4408.90Wood; n.e.c. in heading no. 4408, sheets for veneer or plywood, other wood sawn lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, not exceeding 6mm in thicknessExempted
4409.10Wood; coniferous (including unassembled strips and friezes for parquet flooring), continuously shaped along any edges, ends or faces, whether or not planed, sanded or end-jointedExempted
4409.21Wood; bamboo (including unassembled strips and friezes for parquet flooring), continuously shaped along any edges, ends or faces, whether or not planed, sanded or end-jointedExempted
4409.22Wood; tropical (including unassembled strips and friezes for parquet flooring), continuously shaped along any edges, ends or faces, whether or not planed, sanded or end-jointedExempted
4409.29Wood; non-coniferous, other than bamboo or tropical wood, (including unassembled strips and friezes for parquet flooring), continuously shaped along any edges, ends or faces, whether or not planed, sanded or end-jointedExempted
4410.11Particle board of wood, whether or not agglomerated with resins or other organic binding substancesExempted
4410.12Oriented strand board (OSB) of wood, whether or not agglomerated with resins or other organic binding substancesExempted
4410.19Wafer board and similar board of wood n.e.c. in item no. 4410.1, whether or not agglomerated with resins or other organic binding substancesExempted
4410.90Particle board, oriented strand board (OSB) and similar board of ligneous materials other than wood, whether or not agglomerated with resins or other organic binding substancesExempted
4411.12Medium density fibreboard (MDF), of a thickness not exceeding 5 mmExempted
4411.13Medium density fibreboard (MDF), of a thickness exceeding 5 mm but not exceeding 9 mmExempted
4411.14Medium density fibreboard (MDF), of a thickness exceeding 9 mmExempted
4411.92Fibreboard (other than MDF) of a density exceeding 0.8g/cm3, of wood or other ligneous materials, bonded or not with resins or other organic substancesExempted
4411.93Fibreboard (other than MDF) of a density exceeding 0.5g/cm3 but not 0.8g/cm3, of wood or other ligneous materials, bonded or not with resins or other organic substancesExempted
4411.94Fibreboard (other than MDF) of a density not exceeding 0.5g/cm3, of wood or other ligneous materials, bonded or not with resins or other organic substancesExempted
4412.10Plywood, veneered panels and similar laminated wood; of bamboo2.5%
4412.31Plywood; consisting only of sheets of wood (not bamboo), each ply 6mm or thinner, with at least one outer ply of tropical woodExempted
4412.33Plywood; with sheets of wood only; not bamboo; each ply 6mm or less, with at least one outer ply of alder, ash, beech, birch, cherry, chestnut, elm, eucalyptus, hickory, horse chestnut, lime, maple, oak, plane, poplar, aspen, robinia, tulipwood or walnutExempted
4412.34Plywood; consisting only of sheets of wood (not bamboo), each ply 6mm or thinner, with at least one outer ply of non-coniferous wood not listed in subheading 4412.33Exempted
4412.39Plywood; consisting only of sheets of wood (not bamboo), each ply 6mm or thinner, with both outer plies of coniferous woodExempted
4412.99Plywood; n.e.c. in heading 4412, with both outer plies of coniferous wood5%
4413.00Wood; densified wood, in blocks, plates, strips or profile shapesExempted
4415.10Wood; cases, boxes, crates, drums, similar packings and cable-drums5%
4415.20Wood; pallets, box pallets and other load boards; pallet collars5%
4416.00Wood; casks, barrels, vats, tubs and other coopers' products and parts thereof, of wood, including staves2.5%
4417.00Wood; tools, tool bodies, tool handles, broom or brush bodies and handles, boot and shoe lasts and trees, of wood5%
4418.40Wood; shuttering for concrete constructional work25%
4418.50Wood; shingles and shakes25%
4418.73Wood; assembled flooring panels, of bamboo or with at least the top layer (wear layer) of bamboo25%
4418.74Wood; assembled flooring panels, not of bamboo or with at least the top layer (wear layer) of bamboo, for mosaic floors25%
4418.75Wood; assembled flooring panels, not of bamboo or with at least the top layer (wear layer) of bamboo, multilayer25%
4418.79Wood; assembled flooring panels, n.e.c in headings 4418.73, 4418.74 or 4418.7525%
4418.91Wood; builders' joinery and carpentry of wood n.e.c. in heading no. 4418, of bamboo25%
4418.99Wood; builders' joinery and carpentry of wood n.e.c. in heading no. 4418, other than of bamboo or cellular wood panels25%
4419.11Tableware and kitchenware, of wood; of bamboo, bread boards, chopping boards and similar boards5%
4419.12Tableware and kitchenware, of wood; of bamboo, chopsticks5%
4419.19Tableware and kitchenware, of wood; of bamboo, n.e.c. in heading 44195%
4419.90Tableware and kitchenware, of wood; not of bamboo or tropical wood5%
4420.90Wood; marquetry and inlaid wood, caskets and cases for jewellery or cutlery and similar articles of wood, wooden articles of furniture not falling in chapter 9425%
4421.10Wood; clothes hangers5%
4421.91Wood; of bamboo, articles n.e.c. in heading no. 4414 to 4420 (excluding clothes hangers)5%
4421.99Wood; not of bamboo, articles n.e.c. in heading no. 4414 to 4420 (excluding clothes hangers)1.25%

Data source: WITS/UNCTAD TRAINS (MFN 2020). Values are indicative HS6 MFN averages, not shipment-specific applied rates. Import permission and restrictions are not assessed. Historical reference rates exclude VAT, excise and other national measures. Separate national entries preserve the columns printed by their source; these are not a complete shipment assessment. Full disclaimer.