USITC 2026 HTS Revision 19
26,806 official source entries are searchable. Checked 2026-09-22; edition published 2026-09-15.
Printed tariff and statistical lines from this edition, separate from historical WITS averages. Blank duty cells are not a confirmed zero. Review the parent tariff line, general and chapter notes, chapter 99, origin, exclusions, quotas and additional duties. No shipment total or special-rate eligibility is calculated. The edition publication date is not a line-level effective date.
Original source definitions and general notes
Official schedule and source documentation4408.39.02
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: › Of tropical wood:
Other
- Column 1 — General
- Free
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- 20%
Official source for this code4408.39.02.10
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: › Of tropical wood: › Other
Spliced or end-jointed
Source units: m2
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 4408.39.02 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 20%
Open parent line in the official schedule Official source for this code4408.39.02.20
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: › Of tropical wood: › Other › Other:
Acajou or Acajou d'Afrique (Khaya spp.), also known as African mahogany
Source units: m2
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 4408.39.02 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 20%
Open parent line in the official schedule Official source for this code4408.39.02.30
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: › Of tropical wood: › Other › Other:
Anigre (Aningeria spp.), also known as Aningre, Aniegre or Anegre
Source units: m2
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 4408.39.02 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 20%
Open parent line in the official schedule Official source for this code4408.39.02.40
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: › Of tropical wood: › Other › Other:
Ceiba (Ceiba spp.)
Source units: m2
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 4408.39.02 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 20%
Open parent line in the official schedule Official source for this code4408.39.02.50
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: › Of tropical wood: › Other › Other:
Obeche (Triplochiton spp.), also known as Ayous
Source units: m2
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 4408.39.02 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 20%
Open parent line in the official schedule Official source for this code4408.39.02.60
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: › Of tropical wood: › Other › Other:
Okoume (Aucoumea spp.)
Source units: m2
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 4408.39.02 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 20%
Open parent line in the official schedule Official source for this code4408.39.02.70
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: › Of tropical wood: › Other › Other:
Sapele (Sapelli), Sipo or Utile (Entandrophragma spp.)
Source units: m2
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 4408.39.02 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 20%
Open parent line in the official schedule Official source for this code4408.39.02.91
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: › Of tropical wood: › Other › Other:
Other
Source units: m2
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 4408.39.02 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 20%
Open parent line in the official schedule Official source for this code