26,806 official source entries are searchable. Checked 2026-09-22; edition published 2026-09-15.
Printed tariff and statistical lines from this edition, separate from historical WITS averages. Blank duty cells are not a confirmed zero. Review the parent tariff line, general and chapter notes, chapter 99, origin, exclusions, quotas and additional duties. No shipment total or special-rate eligibility is calculated. The edition publication date is not a line-level effective date.
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced):
Of a width of 300 mm or more
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of 300 mm or more › Containing more than 0.5 percent but less than 24 percent by weight of nickel:
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
Source units: kg
Of a width of 300 mm or more
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of 300 mm or more › Containing more than 0.5 percent but less than 24 percent by weight of nickel:
Other
Source units: kg
Of a width of 300 mm or more
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of 300 mm or more › Other:
Containing less than 15 percent by weight of chromium
Source units: kg
Of a width of 300 mm or more
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of 300 mm or more › Other:
Other
Source units: kg
Of a width of 300 mm or more
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm:
Of a thickness exceeding 1.25 mm
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness exceeding 1.25 mm
Of high-nickel alloy steel
Source units: kg
Of a thickness exceeding 1.25 mm
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness exceeding 1.25 mm › Other: › Containing more than 0.5 percent by weight of nickel:
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
Source units: kg
Of a thickness exceeding 1.25 mm
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness exceeding 1.25 mm › Other: › Containing more than 0.5 percent by weight of nickel:
Other
Source units: kg
Of a thickness exceeding 1.25 mm
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness exceeding 1.25 mm › Other: › Other:
Containing less than 15 percent by weight of chromium
Source units: kg
Of a thickness exceeding 1.25 mm
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness exceeding 1.25 mm › Other: › Other:
Other
Source units: kg
Of a thickness exceeding 1.25 mm
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm:
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Of high-nickel alloy steel
Source units: kg
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm › Other: › Containing more than 0.5 percent by weight of nickel:
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
Source units: kg
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm › Other: › Containing more than 0.5 percent by weight of nickel:
Other
Source units: kg
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm › Other: › Other:
Containing less than 15 percent by weight of chromium
Source units: kg
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm › Other: › Other:
Other
Source units: kg
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness not exceeding 0.25 mm:
Razor blade steel
Source units: kg
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness not exceeding 0.25 mm:
Other
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness not exceeding 0.25 mm: › Other
Containing more than 0.5 percent but less than 24 percent by weight of nickel
Source units: kg
Other
Flat-rolled products of stainless steel, of a width of less than 600 mm: › Not further worked than cold-rolled (cold-reduced): › Of a width of less than 300 mm: › Of a thickness not exceeding 0.25 mm: › Other
Other
Source units: kg
Other
Reported average: 0%.
Source year: 2023. Classification: HS 2022 (H6). Checked 2026-09-14.
National lines included: 5 of 5. Excluded from the average: 0.
Reported ad-valorem range: 0%–0%.
Reported historical ad-valorem MFN simple average for 2023, not a national tariff schedule. No preferential rates, additional duties, VAT, excise or import permissions are determined.
Not a current 2026 national duty. The HS6 average does not determine the duty of a particular national subdivision, origin or shipment.
WITS observation for this code and year
UN Comtrade H6 descriptions (HS 2022)
WITS API definitions: reported averages and excluded national lines
Direct HS code answer for United States
The source reports an indicative HS6 MFN average of 0.00% (2023 MFN average) for Steel, stainless; flat-rolled, width less than 600mm, cold-rolled.Source status: not assessed. Verify the exact national tariff line, origin treatment, taxes, restrictions, and current customs guidance before using this information in a declaration.
0.00% (2023 MFN average)
not assessed
Import planning
Request a one-page research summary with source checks, landed-cost inputs, and points to verify for HS code 722020 in United States.
Each destination shows its own source label. Oman uses its national schedule; Qatar and UAE entries may cite their separately published references and unresolved exceptions. Other entries retain the historical GCC reference. National codes, duty notes, restrictions and tax treatment can differ; verify with the destination customs authority.
| HS Code | Description | Duty |
|---|---|---|
| 722011 | Steel, stainless; flat-rolled, width less than 600mm, hot-rolled, of a thickness of 4.75mm or more | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 722012 | Steel, stainless; flat-rolled, width less than 600mm, hot-rolled, of a thickness of less than 4.75mm | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 722090 | Steel, stainless; flat-rolled, width less than 600mm, n.e.c. in heading no 7220 | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
Data source: WITS/UNCTAD TRAINS (MFN 2022). Values are indicative HS6 MFN averages, not shipment-specific applied rates. Import permission and restrictions are not assessed. Historical reference rates exclude VAT, excise and other national measures. Separate national entries preserve the columns printed by their source; these are not a complete shipment assessment. Full disclaimer.