26,806 official source entries are searchable. Checked 2026-09-22; edition published 2026-09-15.
Printed tariff and statistical lines from this edition, separate from historical WITS averages. Blank duty cells are not a confirmed zero. Review the parent tariff line, general and chapter notes, chapter 99, origin, exclusions, quotas and additional duties. No shipment total or special-rate eligibility is calculated. The edition publication date is not a line-level effective date.
Flat-rolled products of other alloy steel, of a width of 600 mm or more: › Other, not further worked than hot-rolled, in coils: › Of a thickness of 4.75 mm or more:
Of tool steel
Flat-rolled products of other alloy steel, of a width of 600 mm or more: › Other, not further worked than hot-rolled, in coils: › Of a thickness of 4.75 mm or more: › Of tool steel
Of high-speed steel
Source units: kg
Of tool steel
Flat-rolled products of other alloy steel, of a width of 600 mm or more: › Other, not further worked than hot-rolled, in coils: › Of a thickness of 4.75 mm or more: › Of tool steel
Other
Source units: kg
Of tool steel
Flat-rolled products of other alloy steel, of a width of 600 mm or more: › Other, not further worked than hot-rolled, in coils: › Of a thickness of 4.75 mm or more:
Other
Flat-rolled products of other alloy steel, of a width of 600 mm or more: › Other, not further worked than hot-rolled, in coils: › Of a thickness of 4.75 mm or more: › Other
Of high-nickel alloy steel
Source units: kg
Other
Flat-rolled products of other alloy steel, of a width of 600 mm or more: › Other, not further worked than hot-rolled, in coils: › Of a thickness of 4.75 mm or more: › Other
Other
Source units: kg
Other
Flat-rolled products of other alloy steel, of a width of 600 mm or more: › Other, not further worked than hot-rolled, in coils: › Of a thickness of less than 4.75 mm:
Of tool steel
Flat-rolled products of other alloy steel, of a width of 600 mm or more: › Other, not further worked than hot-rolled, in coils: › Of a thickness of less than 4.75 mm: › Of tool steel
Of high-speed steel
Source units: kg
Of tool steel
Flat-rolled products of other alloy steel, of a width of 600 mm or more: › Other, not further worked than hot-rolled, in coils: › Of a thickness of less than 4.75 mm: › Of tool steel
Other
Source units: kg
Of tool steel
Flat-rolled products of other alloy steel, of a width of 600 mm or more: › Other, not further worked than hot-rolled, in coils: › Of a thickness of less than 4.75 mm:
Other
Source units: kg
Reported average: 0%.
Source year: 2023. Classification: HS 2022 (H6). Checked 2026-09-14.
National lines included: 4 of 4. Excluded from the average: 0.
Reported ad-valorem range: 0%–0%.
Reported historical ad-valorem MFN simple average for 2023, not a national tariff schedule. No preferential rates, additional duties, VAT, excise or import permissions are determined.
Not a current 2026 national duty. The HS6 average does not determine the duty of a particular national subdivision, origin or shipment.
WITS observation for this code and year
UN Comtrade H6 descriptions (HS 2022)
WITS API definitions: reported averages and excluded national lines
Direct HS code answer for United States
The source reports an indicative HS6 MFN average of 0.00% (2023 MFN average) for Steel, alloy; flat-rolled, width 600mm or more, hot-rolled, in coils.Source status: not assessed. Verify the exact national tariff line, origin treatment, taxes, restrictions, and current customs guidance before using this information in a declaration.
0.00% (2023 MFN average)
not assessed
Import planning
Request a one-page research summary with source checks, landed-cost inputs, and points to verify for HS code 722530 in United States.
Each destination shows its own source label. Oman uses its national schedule; Qatar and UAE entries may cite their separately published references and unresolved exceptions. Other entries retain the historical GCC reference. National codes, duty notes, restrictions and tax treatment can differ; verify with the destination customs authority.
| HS Code | Description | Duty |
|---|---|---|
| 722511 | Steel, alloy; flat-rolled, width 600mm or more, of silicon-electrical steel, grain-oriented | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 722519 | Steel, alloy; flat-rolled, width 600mm or more, of silicon-electrical steel, (other than grain-oriented) | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 722540 | Steel, alloy; flat-rolled, width 600mm or more, hot-rolled, not in coils | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 722550 | Steel, alloy; flat-rolled, width 600mm or more, cold-rolled | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 722591 | Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, electrolytically plated or coated with zinc | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 722592 | Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, plated or coated with zinc (other than electrolytically) | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 722599 | Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, (other than plated or coated with zinc) | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
Data source: WITS/UNCTAD TRAINS (MFN 2022). Values are indicative HS6 MFN averages, not shipment-specific applied rates. Import permission and restrictions are not assessed. Historical reference rates exclude VAT, excise and other national measures. Separate national entries preserve the columns printed by their source; these are not a complete shipment assessment. Full disclaimer.