USITC 2026 HTS Revision 19
26,806 official source entries are searchable. Checked 2026-09-22; edition published 2026-09-15.
Printed tariff and statistical lines from this edition, separate from historical WITS averages. Blank duty cells are not a confirmed zero. Review the parent tariff line, general and chapter notes, chapter 99, origin, exclusions, quotas and additional duties. No shipment total or special-rate eligibility is calculated. The edition publication date is not a line-level effective date.
Original source definitions and general notes
Official schedule and source documentation7228.50.10
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: › Other bars and rods, not further worked than cold-formed or cold-finished:
Of tool steel (other than high-speed steel)
- Column 1 — General
- Free
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- 29%
Source notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7228.50.10.10
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: › Other bars and rods, not further worked than cold-formed or cold-finished: › Of tool steel (other than high-speed steel)
Of ball-bearing steel
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7228.50.10 — read its printed duties and notes
Of tool steel (other than high-speed steel)
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 29%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7228.50.10.20
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: › Other bars and rods, not further worked than cold-formed or cold-finished: › Of tool steel (other than high-speed steel) › Other: › With a maximum cross-sectional dimension of less than 18 mm:
Of round or rectangular cross section with surfaces ground, milled or polished
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7228.50.10 — read its printed duties and notes
Of tool steel (other than high-speed steel)
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 29%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7228.50.10.40
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: › Other bars and rods, not further worked than cold-formed or cold-finished: › Of tool steel (other than high-speed steel) › Other: › With a maximum cross-sectional dimension of less than 18 mm:
Other
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7228.50.10 — read its printed duties and notes
Of tool steel (other than high-speed steel)
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 29%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7228.50.10.60
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: › Other bars and rods, not further worked than cold-formed or cold-finished: › Of tool steel (other than high-speed steel) › Other: › With a maximum cross-sectional dimension of 18 mm or more:
Of round or rectangular cross section with surfaces ground, milled or polished
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7228.50.10 — read its printed duties and notes
Of tool steel (other than high-speed steel)
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 29%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7228.50.10.80
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: › Other bars and rods, not further worked than cold-formed or cold-finished: › Of tool steel (other than high-speed steel) › Other: › With a maximum cross-sectional dimension of 18 mm or more:
Other
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7228.50.10 — read its printed duties and notes
Of tool steel (other than high-speed steel)
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 29%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7228.50.50
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: › Other bars and rods, not further worked than cold-formed or cold-finished:
Other
- Column 1 — General
- Free
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- 28%
Source notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7228.50.50.05
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: › Other bars and rods, not further worked than cold-formed or cold-finished: › Other
Of high-nickel alloy steel
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7228.50.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 28%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7228.50.50.15
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: › Other bars and rods, not further worked than cold-formed or cold-finished: › Other › Other:
With a diameter or cross section measuring less than 76 mm
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7228.50.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 28%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7228.50.50.40
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: › Other bars and rods, not further worked than cold-formed or cold-finished: › Other › Other:
With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7228.50.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 28%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7228.50.50.70
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: › Other bars and rods, not further worked than cold-formed or cold-finished: › Other › Other:
With a diameter or cross section exceeding 228 mm
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7228.50.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 28%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code