USITC 2026 HTS Revision 19
26,806 official source entries are searchable. Checked 2026-09-22; edition published 2026-09-15.
Printed tariff and statistical lines from this edition, separate from historical WITS averages. Blank duty cells are not a confirmed zero. Review the parent tariff line, general and chapter notes, chapter 99, origin, exclusions, quotas and additional duties. No shipment total or special-rate eligibility is calculated. The edition publication date is not a line-level effective date.
Original source definitions and general notes
Official schedule and source documentation8466.93.11.00
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461:
For water-jet cutting machines
Source units: No.
- Column 1 — General
- Free
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- 35%
Official source for this code8466.93.15
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Bed, base, table, head, tail, saddle, cradle, cross slide, column, arm, saw arm, wheelhead, tailstock, headstock, ram, frame, work-arbor support, and C-frame castings, weldments or fabrications:
Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
- Column 1 — General
- Free
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- 10%
Source notes and context notes
- Columns: other — See 9903.90.08.
Official source for this code8466.93.15.30
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Bed, base, table, head, tail, saddle, cradle, cross slide, column, arm, saw arm, wheelhead, tailstock, headstock, ram, frame, work-arbor support, and C-frame castings, weldments or fabrications: › Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
For metalworking machine tools for cutting, grinding or finishing gears
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 8466.93.15 — read its printed duties and notes
Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 10%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.08.
Official source for this code8466.93.15.60
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Bed, base, table, head, tail, saddle, cradle, cross slide, column, arm, saw arm, wheelhead, tailstock, headstock, ram, frame, work-arbor support, and C-frame castings, weldments or fabrications: › Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
Other
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 8466.93.15 — read its printed duties and notes
Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 10%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.08.
Official source for this code8466.93.30.00
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Bed, base, table, head, tail, saddle, cradle, cross slide, column, arm, saw arm, wheelhead, tailstock, headstock, ram, frame, work-arbor support, and C-frame castings, weldments or fabrications: › Other:
Of metalworking machine tools for cutting gears
Source units: No.
- Column 1 — General
- 5.8%
- Column 1 — Special (eligibility required)
- Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)
- Column 2
- 45%
Official source for this code8466.93.53
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Bed, base, table, head, tail, saddle, cradle, cross slide, column, arm, saw arm, wheelhead, tailstock, headstock, ram, frame, work-arbor support, and C-frame castings, weldments or fabrications: › Other:
Other
- Column 1 — General
- 4.7%
- Column 1 — Special (eligibility required)
- Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)
- Column 2
- 35%
Official source for this code8466.93.53.40
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Bed, base, table, head, tail, saddle, cradle, cross slide, column, arm, saw arm, wheelhead, tailstock, headstock, ram, frame, work-arbor support, and C-frame castings, weldments or fabrications: › Other: › Other
Of metalworking machine tools for grinding or finishing gears
Source units: No.
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 8466.93.53 — read its printed duties and notes
Other
- Column 1 — General: 4.7%
- Column 1 — Special (eligibility required): Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)
- Column 2: 35%
Open parent line in the official schedule Official source for this code8466.93.53.85
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Bed, base, table, head, tail, saddle, cradle, cross slide, column, arm, saw arm, wheelhead, tailstock, headstock, ram, frame, work-arbor support, and C-frame castings, weldments or fabrications: › Other: › Other
Other
Source units: No.
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 8466.93.53 — read its printed duties and notes
Other
- Column 1 — General: 4.7%
- Column 1 — Special (eligibility required): Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)
- Column 2: 35%
Open parent line in the official schedule Official source for this code8466.93.60
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Other:
Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
- Column 1 — General
- Free
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- 10%
Official source for this code8466.93.60.30
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Other: › Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
For metalworking machine tools for cutting, grinding or finishing gears
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 8466.93.60 — read its printed duties and notes
Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 10%
Open parent line in the official schedule Official source for this code8466.93.60.60
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Other: › Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
Other
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 8466.93.60 — read its printed duties and notes
Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 10%
Open parent line in the official schedule Official source for this code8466.93.75.00
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Other: › Other:
Of metalworking machine tools for cutting gears
Source units: No.
- Column 1 — General
- 5.8%
- Column 1 — Special (eligibility required)
- Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)
- Column 2
- 45%
Official source for this code8466.93.96.00
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Other: › Other: › Other:
Parts and accessories of machine tools of subheadings 8456.11, 8456.12, 8456.30, 8457.10, 8458.91, 8459.21, 8459.61 and 8461.50, of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing machines
Source units: No.
- Column 1 — General
- Free
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- 35%
Official source for this code8466.93.98
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Other: › Other: › Other:
Other
- Column 1 — General
- 4.7%
- Column 1 — Special (eligibility required)
- Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)
- Column 2
- 35%
Official source for this code8466.93.98.40
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Other: › Other: › Other: › Other
Of metalworking machine tools for grinding or finishing gears
Source units: No.
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 8466.93.98 — read its printed duties and notes
Other
- Column 1 — General: 4.7%
- Column 1 — Special (eligibility required): Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)
- Column 2: 35%
Open parent line in the official schedule Official source for this code8466.93.98.85
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: › Other: › For machines of headings 8456 to 8461: › Other: › Other: › Other: › Other: › Other
Other
Source units: No.
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 8466.93.98 — read its printed duties and notes
Other
- Column 1 — General: 4.7%
- Column 1 — Special (eligibility required): Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)
- Column 2: 35%
Open parent line in the official schedule Official source for this code