USITC 2026 HTS Revision 19
26,806 official source entries are searchable. Checked 2026-09-22; edition published 2026-09-15.
Printed tariff and statistical lines from this edition, separate from historical WITS averages. Blank duty cells are not a confirmed zero. Review the parent tariff line, general and chapter notes, chapter 99, origin, exclusions, quotas and additional duties. No shipment total or special-rate eligibility is calculated. The edition publication date is not a line-level effective date.
Original source definitions and general notes
Official schedule and source documentation7306.30.10
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel:
Having a wall thickness of less than 1.65 mm
- Column 1 — General
- Free
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- 25%
Official source for this code7306.30.10.10
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of less than 1.65 mm
Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit
Source units: kg
- Column 1 — General
-
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
-
Parent tariff line 7306.30.10 — read its printed duties and notes
Having a wall thickness of less than 1.65 mm
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 25%
Open parent line in the official schedule Official source for this code7306.30.10.90
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of less than 1.65 mm
Other
Source units: kg
- Column 1 — General
-
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
-
Parent tariff line 7306.30.10 — read its printed duties and notes
Having a wall thickness of less than 1.65 mm
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 25%
Open parent line in the official schedule Official source for this code7306.30.30.00
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more:
Tapered steel pipes and tubes principally used as parts of illuminating articles
Source units: kg
- Column 1 — General
- Free
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- 45%
Official source for this code7306.30.50
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more:
Other
- Column 1 — General
- Free
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- 5.5%
Source notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.10
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.15
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other
Other, cold-drawn
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.20
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other
Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mm
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.26
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other: › With an outside diameter not exceeding 114.3 mm: › Galvanized: › Imported with coupling:
With an outside diameter not exceeding 50.8 mm
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.27
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other: › With an outside diameter not exceeding 114.3 mm: › Galvanized: › Imported with coupling:
With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.28
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other: › With an outside diameter not exceeding 114.3 mm: › Galvanized:
Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.31
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other: › With an outside diameter not exceeding 114.3 mm: › Galvanized: › Other:
With an outside diameter not exceeding 50.8 mm
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.33
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other: › With an outside diameter not exceeding 114.3 mm: › Galvanized: › Other:
With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.35
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other: › With an outside diameter not exceeding 114.3 mm: › Other:
Tube and pipe hollows for redrawing
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.41
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other: › With an outside diameter not exceeding 114.3 mm: › Other: › Imported with coupling:
With an outside diameter not exceeding 50.8 mm
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.43
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other: › With an outside diameter not exceeding 114.3 mm: › Other: › Imported with coupling:
With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.56
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other: › With an outside diameter not exceeding 114.3 mm: › Other: › Other:
With an outside diameter not exceeding 50.8 mm
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.57
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other: › With an outside diameter not exceeding 114.3 mm: › Other: › Other:
With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.85
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other: › With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm:
Galvanized
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code7306.30.50.90
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of iron or nonalloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other: › With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm:
Other
Source units: kg
- Column 1 — General
- No amount printed on this row; not a confirmed zero.
- Column 1 — Special (eligibility required)
- No amount printed on this row; not a confirmed zero.
- Column 2
- No amount printed on this row; not a confirmed zero.
Parent tariff line 7306.30.50 — read its printed duties and notes
Other
- Column 1 — General: Free
- Column 1 — Special (eligibility required): No amount printed.
- Column 2: 5.5%
Open parent line in the official scheduleSource notes and context notes
- Columns: other — See 9903.90.09.
Official source for this code