26,806 official source entries are searchable. Checked 2026-09-22; edition published 2026-09-15.
Printed tariff and statistical lines from this edition, separate from historical WITS averages. Blank duty cells are not a confirmed zero. Review the parent tariff line, general and chapter notes, chapter 99, origin, exclusions, quotas and additional duties. No shipment total or special-rate eligibility is calculated. The edition publication date is not a line-level effective date.
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of other alloy steel:
Having a wall thickness of less than 1.65 mm
Source units: kg
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of other alloy steel: › Having a wall thickness of 1.65 mm or more:
Tapered pipes and tubes of steel principally used as parts of illuminating articles
Source units: kg
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of other alloy steel: › Having a wall thickness of 1.65 mm or more:
Other
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of other alloy steel: › Having a wall thickness of 1.65 mm or more: › Other
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn
Source units: kg
Other
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of other alloy steel: › Having a wall thickness of 1.65 mm or more: › Other
Other, cold-drawn or cold-rolled (cold- reduced)
Source units: kg
Other
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of other alloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other:
With an outside diameter not exceeding 114.3 mm
Source units: kg
Other
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: › Other, welded, of circular cross section, of other alloy steel: › Having a wall thickness of 1.65 mm or more: › Other › Other:
With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm
Source units: kg
Other
Reported average: 0%.
Source year: 2023. Classification: HS 2022 (H6). Checked 2026-09-14.
National lines included: 3 of 3. Excluded from the average: 0.
Reported ad-valorem range: 0%–0%.
Reported historical ad-valorem MFN simple average for 2023, not a national tariff schedule. No preferential rates, additional duties, VAT, excise or import permissions are determined.
Not a current 2026 national duty. The HS6 average does not determine the duty of a particular national subdivision, origin or shipment.
WITS observation for this code and year
UN Comtrade H6 descriptions (HS 2022)
WITS API definitions: reported averages and excluded national lines
Direct HS code answer for United States
The source reports an indicative HS6 MFN average of 0.00% (2023 MFN average) for Steel, alloy; tubes, pipes and hollow profiles (other than stainless steel or seamless), welded, of circular cross-section, n.e.c. in chapter 73.Source status: not assessed. Verify the exact national tariff line, origin treatment, taxes, restrictions, and current customs guidance before using this information in a declaration.
0.00% (2023 MFN average)
not assessed
Import planning
Request a one-page research summary with source checks, landed-cost inputs, and points to verify for HS code 730650 in United States.
Each destination shows its own source label. Oman uses its national schedule; Qatar and UAE entries may cite their separately published references and unresolved exceptions. Other entries retain the historical GCC reference. National codes, duty notes, restrictions and tax treatment can differ; verify with the destination customs authority.
| HS Code | Description | Duty |
|---|---|---|
| 730611 | Steel; stainless; line pipe of a kind used for oil or gas pipelines n.e.c. in chapter 73, welded, (not seamless) | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 730619 | Iron or steel (excluding cast iron); line pipe of a kind used for oil or gas pipelines (other than of stainless steel or seamless), n.e.c. in chapter 73 | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 730621 | Steel, stainless; casing and tubing of a kind used in drilling for oil and gas, n.e.c. in chapter 73, welded, (not seamless) | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 730629 | Iron or steel (excluding cast iron); casing and tubing of a kind used in drilling for oil and gas (other than stainless steel or seamless), n.e.c. in chapter 73 | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 730630 | Iron or non-alloy steel (excluding cast iron); tubes and pipes (not seamless), welded, of circular cross-section, n.e.c. in chapter 73 | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 730640 | Steel, stainless; tubes, pipes and hollow profiles, welded, of circular cross-section, n.e.c. in chapter 73 | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 730661 | Iron or steel (excluding cast iron); tubes, pipes and hollow profiles (not seamless), welded, of square or rectangular cross-section, n.e.c. in chapter 73 | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 730669 | Iron or steel (excluding cast iron); tubes, pipes and hollow profiles (not seamless), n.e.c. in chapter 73, welded, of non-circular cross-section (not square or rectangular cross-section) | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
| 730690 | Iron or steel (excluding cast iron); tubes, pipes and hollow profiles (not seamless), n.e.c. in chapter 73 | 0.00% (2023 MFN average)WITS 2023 historical MFN average |
Data source: WITS/UNCTAD TRAINS (MFN 2022). Values are indicative HS6 MFN averages, not shipment-specific applied rates. Import permission and restrictions are not assessed. Historical reference rates exclude VAT, excise and other national measures. Separate national entries preserve the columns printed by their source; these are not a complete shipment assessment. Full disclaimer.